ORDER RUBBA-ROOF PROFESSIONAL 100/102

Quantity

10kg £82.45 12kg £109.71 16kg £129.54 20kg £152.40 22kg £178.25 26kg £203.20 30kg £228.16 36kg £277.65 40kg £302.61 46kg £352.10

Enter colour below: (Black / Grey)

We supply Rubba-Roof Professional in 6kg & 10kg cans but can provide in larger for trade customers.

Available in two colours:

• BLACK /100
• LIGHT GREY /102
  
  

Please be sure to enter colour choice before placing order.

Rubba-Roof Pro Coverage:

1kg covers 1 square metre. Therefore an area of 10m2 will require 10kg Rubba-Roof Professional. However, please note that rougher surfaces, corrugations, up stands and areas requiring patching, will increase the quantity needed.

Please note that all Rubba-Roof Professional products should be used within a six month time frame from purchase date.

Most information can be found on our FAQ's page and in our printable pdf Technical Spec Sheet but please don't hesitate to contact us should you require further information. You can contact us via email or telephone.

Please call 02380 424268 for telephone sales and quantities not available through our website - Discount available for trade customers subject to minimum order requirements.

Order Rubba-Roof Professional Primer for Porous Substrates

Quantity

1 litre £21.75 2 litre £31.50 3 litre £41.25 4 litre £51.07 5 litre £55.59

Rubba-Roof Primer is a one component, polyurethane primer, containing a 'felt-friendly' solvent. It is slow to cure and can be over coated when tacky (NOT WET), unlike other primers.

We supply Rubba-Roof Primer for porous roof surfaces and substrates, in cans of 1 & 5 litres. Please enquire if larger quantities are required.

When coating porous surfaces, care should be taken to ensure that enough primer is used to seal the surface. If the primer soaks in to leave a dry appearance, a further coat should be applied within 48 hours. Rubba-Roof Professional waterproof membrane coating should then also be applied within a 48 hour time-frame.

Order Fiberglass Re-inforcement Scrim

Quantity

50m x 1m - £47.75

(Regular)

Reinforcement Scrim:  (5mm mesh) This is used to reinforce joints, minor fissures, clefts, fractures, and cracks in the substrate. Also for the coating on a walkway or veranda which is to be used for light foot traffic (please contact us for heavy foot traffic surfaces). It can also be used with up stands, or any other area that will need strengthening and/or stabilizing.